CARE AND CLEANING
1. Unplug the unit from the wall outlet and allow to cool completely.
2. Swivel the Water Spreader to the left and remove the Permanent
Nylon Filter.
3. Remove the Removable Drip Tray by lifting up slightly and gently pulling
towards you.
4. Wash the Permanent Nylon Filter, Removable Drip Tray, the Mug and
Mug Cover in warm soapy water. Rinse and dry.
5. Wipe the Base with a soft damp cloth. NEVER IMMERSE THE BASE IN
WATER OR ANY OTHER LIQUID.
6. DO NOT clean the inside of the Water Reservoir with a cloth as this will
leave a residue of lint and may clog the Coffee Maker.
Descaling
Over a period of time, minerals and calcium found in water will accumulate
in your Coffee Maker and may affect its operation. The appliance should be
cleaned approximately every six months, depending on water conditions.
Use distilled vinegar in the following manner to remove the mineral deposits.
1. Fill the Mug 2/3 full with white vinegar and then to the top with cold
water.
2. Pour into the Water Reservoir
3. Remove the Permanent Nylon Filter.
4. Place the Mug, without the Cover under the dispenser.
5. Plug the unit into a 120 Volt A.C. outlet.
6. If the ON Indicator Light is already on then the cycle will start
automatically. If the Indicator Light is not on, press the ON button and
the light will illuminate and the cycle will start.
7. Once the water and vinegar solution has finished dripping in the Mug,
remove the plug from the wall outlet.
8. Wait 3 - 4 minutes then repeat the above steps using cold water to rinse
away any residual vinegar. Repeat twice.
9. Wash the Mug in warm soapy water.
5
Booklet_TFC25T_ENG2.qxd:Salton Booklet 2/1/11 3:42 PM Page 5