How to Brew Coffee
1. Fill your favourite cup/mug with fresh cold water. Pour into the Water
Reservoir.
NOTE:
Minimum amount of water is 5 oz. (142 ml), maximum
10.5 oz. (300 ml). The maximum fill line is at the top of the vertical line
inside the Water Reservoir.
2. Place cup/mug on Small or Large Cup/Mug Rest.
3. Swivel the Water Spreader to the left. Fill the Permanent Coffee Filter
with approximately 1 tbsp. (15 ml) or 1 scoop of filter coffee grounds for
every 5 oz. (142 ml) of coffee. Return the Water Spreader to its original
position.
4. Plug unit into a 120 Volt A.C. outlet.
5. Press the On/Off Switch to the On position (‘I’).
6. Once the coffee has finished dripping into the mug,
press the On/Off
Switch to the Off position (‘o’).
7. Unplug unit from outlet or follow directions above to prepare another
cup of coffee. Be careful when opening the Reservoir Cover when the
unit it hot.
How to Heat Water for Tea, Hot Chocolate, etc.
1. Fill your favourite cup/mug with fresh cold water.
2. Pour into the Water Reservoir.
NOTE:
Minimum amount of water is 5 oz.
(142 ml), maximum 10.5 oz. (300 ml).
3. Swivel the Water Spreader to the left and remove the Permanent Coffee
Filter. Return Water Spreader to its original position.
4. Add tea bag, hot chocolate, or instant foods etc. to the mug/cup and
place on the Small or Large Mug/Cup Rest.
5. Plug unit into a 120 Volt A.C. outlet.
6. Press the On/Off Switch to the On position (‘I’).
7.
IMPORTANT:
Once the water has finished dripping into the mug,
press
the On/Off Switch to the Off position (‘o’).
8. Unplug unit from outlet or follow directions above for more hot water.
Be careful when opening the Reservoir Cover when the unit it hot.
4
Booklet TFC-1 6/13/02 11:15 AM Page 10
