Speed Settings
Low – for mixing and light blending including drinks, sauces, scrambled
eggs and berries.
High – for heavier mixing such as whole fruit, soups, mayonnaise and solid
ingredients
Pulse – for quick bursts of power and to crush ice
HOW TO USE
1. Place the Blender Jar securely on the Blender Base.
2. Plug into a 120V AC wall outlet.
3. Add ingredients and replace the Lid.
4. Turn the Speed Control/Pulse Dial to the desired setting.
5. When the ingredients have been blended, turn the Speed Control/Pulse
Dial to ‘OFF’. Unplug from the wall outlet
6. Remove the Blender Jar by lifting up - do not twist. NOTE: Wait until the
Cutting Blades have stopped before removing the Blending Jar.
HELPFUL HINTS
•
Prepare solid ingredients by cutting into small pieces 1”-1-1/4” (2-3 cm).
Add a small amount of liquid and place small portions into the Blender
Jar instead of large quantity all at once. Gradually add more liquid
through the Filler Cap opening.
•
Allow hot liquids to cool to a lukewarm temperature before processing.
•
Always place your hand on top of the Lid when operating.
•
While the motor is running, ingredients can be added through the Filler
Cap opening in the center of the Blender Lid.
•
When chopping nuts or other dry mixtures use 3/4 cup (180 ml) at a
time, to ensure even chopping.
•
To crush ice, place the ice cubes into the Jar with the motor switched off.
Close the Lid and turn the Speed Control to the Pulse setting. Add a little
water through the Filler Cap opening for more even ice crushing.
•
DO NOT operate the Blender for more than 90 seconds when
processing dry ingredients.
•
DO NOT run the Blender when empty
4
Booklet_TBL634_EN.qxd:Salton Booklet 3/23/11 2:47 PM Page 4
