3
1. SOFTWARE SUMMARy
1.1. Summary
This software connects the WT-D5800 Digital Wireless Receiver with a personal computer, and monitors
the status of its microphone and receiver. It is used to check the status of the signal in the area where the
microphone is used when the wireless microphone system is set up or when trouble occurs. It has a system
status display function and a log storage function. The software allows the user to check the system status
when there are reception problems and reviews the setup and operation methods.
The following specifications must be met to install the software onto the computer.
[Recommended pC environment]
Hardware requirements
Display
1024 x 768 or greater, High Color or greater
Free hard disk space
200 MB or greater
USB
USB 2.0
Software requirements
OS
Windows 7 SP1 (32/64-bit), Windows 8.1 (32/64-bit),
Windows 10 (32/64-bit)
Note: Windows is the registered trademark of Microsoft Corporation in the United States and other countries.
1.2. Usage
It can be used when
Use this function
Set
up
Checking the system status.
System Status Display
Checking unused channels in order to make a channel plan.
Channel Scan
Checking the signal reception status in the area.
Walk-Test
Af
te
r s
et
up
Checking the system status.
System Status Display
Checking unused channels due to possible interference such as
sound disruption.
Channel Scan
Checking the status of jamming signals due to possible interference
such as sound disruption.
Spectrum Scan
Checking the reception status while the system is in operation due
to occasional sound disruption.
Background Log
