background image

3

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

CAUTION

When Installing the Unit

Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock.

When unplugging the power supply cord, be sure to grasp the power supply plug;never pull on the cord itself.

Operating the unit with a damaged power supply cord may cause a fire or electric shock. 

When moving the unit, be sure to remove its power supply cord from the wall outlet.  Moving the unit with the

power cord connected to the outlet may cause damage to the power cord, resulting in fire  or  electric  shock. 

Avoid  installing  the  unit  in  humid  or  dusty  locations,  in locations exposed to the direct sunlight, near the

heaters,  or  in  locations  generating  sooty  smoke  or steam as doing otherwise may result in fire or electric

When the Unit is in Use

Do  not  place  heavy  object  on  the  unit  as  this may cause it to fall or break which may result in personal

injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.

Do  not  stand  or  sit  on, nor hang down from the unit as this may cause it to fall down or drop,  resulting  in

personal injury and/or property damage.

When  the  unit  is not in  use  for 10 days or more,  or  when the AC power is used for operating the unit, be

sure to take the batteries out  of  the  unit  because  battery  leakage  may  cause  a fire,  personal injury,  or

Switch  off  the  power,  and  unplug  the power  supply  plug  from the AC  outlet for  safety  purposes when

leakage or explosion of the battery.

Make sure to observe the following handling precautions so that a fire or personal injury does not result from

Do not short, disassemble, heat nor put the battery into a fire.
Avoid using both new and old batteries together.

Do not solder a battery directly.
Be sure to use the specified type of batteries.

when removing the power cord, be sure to hold its plug to pull. 

shock.

contamination of environment.

cleaning or leaving the unit unused for 10 days or more. Doing otherwise may cause a fire or electric shock.

Note correct polarity (positive and negative orientation) when inserting a battery in the unit.
Avoid locations exposed to the direct sunlight, high temperature and high humidity when storing batteries.

2. GENERAL DESCRIPTION

TOA’s WA-Z100SD is a portable amplifier that has an elegant design,  durable and water-resistant case. It offers
reliable performance,  clear, powerful sound, and is simple to operate.  Equipped with an audio music player
player,  music can be played from CD,  USB or SD / MMC Card.   It has the option of installing up to  2  UHF
wireless microphone receiver.  Wheels are fitted for moving it around effortlessly.  The unit has an operating

Make sure the volume control is set to minimum position before power is switched on. Loud noise produced

at high volume when power is switched on can impair hearing.

Do not use trolley on ragged ground to avoid any damage.

duration of 3 - 9 hours, depending on the volume.

Summary of Contents for WA-Z100SD AS













Reviews: