Using The Cassette deck WA-641C
EACH PART NAME AND FUNCTION
Recording button/recording mode indica-
tor
Pressing this button causes a built-in red
LED to come on and puts unit in the record-
ing mode. Recording can be started when
the direction selector button is pressed. For
details, refer to page 11.
Eject button
Pressing this button opens the dust cover
and allows the tape to be loaded or re-
moved. Do not press this button during tape
run as this can damage the tape. When you
want to remove the tape, be sure to press
the Stop button to stop tape motion before
pressing this button.
Dust cover (cassette holder)
Tape counter/Counter reset
button
Press this button to reset the
tape
counter
display
to
"000".
Fast forward/Rewind but-
tons
Press this button to send the
tape forward or in the re-
verse direction at top speed.
Stop button
By pressing this button tape
motion can be stopped.
Direction selector/indicator
This selector allows the tape to travel in the
forward or reverse direction
playback or recording. When pressed, the in-
dicator lights green to indicate the tape travel
direction.
for
- 9 -
Tape (playback level) con-
trol
Use this control to adjust the
output signal level during
playback.
Travel mode selector
This selector is used to
change over tape travel
modes
For
details, refer to page 12.
All manuals and user guides at all-guides.com