4
[Front]
(viewed with the front cover removed)
17. AC power cord
Connects to power source.
18. Speaker output terminals
Connects to speakers.
19. Output terminals
Select output impedance with this terminal.
20. Low-cut switch
Cuts off unnecessary low frequency.
21. Module input ports
Accept PLUG-IN MODULES which are optionally
available. Module selection is determined by
application.
22. Bridging input/output
This terminal is used as a mixing bus. Mixing is
achieved when the similar terminal of another
amplifier is connected to this terminal. The output
level taken from this terminal is independent of
the all CONTROLS (except INPUT VOLUME
CONTROLS) so that the terminal can also be
used as recording output. The input impedances
of the equipment to be connected here should be
more than 10 k
Ω
.
23. Mute terminal
With modules employing muting function, which
are optionally available, the input signals fed to
the modules are muted by short-circuiting at this
terminal.
24. Cord clamp
Clamps off lead wires from module inputs, mute
terminals and bridging input/output terminals.
INPUT 1
POWER
ON
250V 3A
250V 6A
OFF
OFF
MAX
INPUT 2
INPUT 3
AC FUSE
OFF
ON
LOW PASS
OFF
ON
HIGH PASS
OUT
63
125
250
500
1k
2k
4k
8k
16k
63
125
250
500
1k
2k
4k
8k
16k
IN
EQUALIZER
OUTPUT FUSE
COMPRESSOR
INPUT 4
INPUT 5
INPUT 6
MASTER
12
6
0
6
12
12
6
0
6
12
Junction Box
20
21
19
23
24
22
18
17
