■
MOUNTING THE SPEAKER ON THE WALL
1. Attach two brackets to the wall using two bolts per
bracket.
Wall mounting dimension
represents the surface
to which the bracket
attaches.
518
460
55
170
134
Speaker mounting bolt
Cap
5 – 6 mm
Direct speaker attachment to the wall
Minimum downward
angle of 15
°
Maximum downward
angle of 75
°
318
249
270
75
°
45
°
15
°
151
33
78
WARNING
Check to ensure that the mounting surface is strong
enough to stand the weight of a load before
beginning installation.
Note
Bolts for attaching the brackets are not supplied with the
unit. Use appropriate types depending on the material and
construction of the wall.
2. Remove caps filling in four screw holes in the unit's
sides. Insert two of the four supplied speaker mounting
bolts into the upper holes in the sides, then tighten the
bolts so that their heads stick out 5-6 mm. Refer to the
figure below.
Note
Take care that the speaker mounting bolt does not stick
out extremely.
3. Fit the speaker mounting bolts into the upper slots of the
brackets.
4. Insert the remaining two speaker mounting bolts into the
screw holes in the unit's sides, and tighten them so that
their heads stick out 5-6 mm. (State of temporary fixing.)
5. Adjust the speaker's downward installation angle.
6. Tighten the four speaker mounting bolts and secure the
speaker.
