Speaker
Waterproof pad
Note:
Must face the speaker‘s side.
Speaker
(optional)
10. JOINING SPEAKERS
Joining line array speakers confi gures a longer linear sound source, permitting richer low-frequency sound
reproduction as well as transmission of higher sound output over a longer distance. To join speakers, use the
optional SR-EP4WP Extension plate.
[Joining Procedure]
Step 1.
Remove the screws and washers (for waterproof) on both sides of the speaker.
Step 2.
Join the 2 speakers using the SR-EP4WP Extension plate and the screws and washers removed in
Step 1. In this event, orient the bracket‘s waterproof pad side toward the speaker‘s side.
Screws to be removed in Step 1
(8 screws on both sides)
Extension plate SR-EP4WP
Machine screw
M5 x 25
Washer for M5
(for waterproof)
Note:
Use the screws and washers
removed in Step 1.
Note
Maximum number of speakers to be
jointed are 3, when using 2 sets of
SR-EP4WP.
11
