Toa SC-632 AS Instruction Manual Download Page 1

 

INSTRUCTION MANUAL 

HORN SPEAKER 

SC-632 AS 

 

1. SAFETY PRECAUTIONS 

 Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. 

 Be sure to follow all the precautionary instruction in this section, which contain important warnings and/or cautions 

regarding safety. 

 After reading, keep this manual handy for future reference. 

 

 

 

 

 

 

 

 

 To  avoid  accidental  air  explosions,  do  not  use  the 

unit around gasoline, thinner or other combustibles. 

 Install  the  unit  only  in  location  that  can  structurally 

support  the  weight  of  the  unit  and  the  mounting 
bracket.  Doing  otherwise  may  result  in  the  unit 
falling  down  and  causing  personal  injury  and/or 
property damage. 

 Protect  the  unit  from  exposure  in  snowy  areas,  as 

the  weight  of  snow  build-up  could  cause  the 
speaker to fall, resulting in personal injuries. 

 Do  not  use  other  method  than  specified  to  mount 

the  bracket.  Extreme  force  is  applied  to  the  unit 
could fall off, possibly resulting in personal injury. 

 Attach the safety wire to the  unit  when mounting in 

locations  high  above  the  ground.  Failure  to  do  so 
could  result  personal  injury  if  the  speaker  should 
later fall for any reason. 

 Use  nuts  and  bolts  those  are  appropriate  for  the 

ceilings  or  wall’s  structure  and  composition.  Failure 
to do so  may cause the speaker to fall, resulting in 
material damage and possible personal injury. 

 Tighten each nut and bolt securely. Ensure that the 

bracket  has  no  loose  joints  after  installation  to 
prevent  accidents  that  could  result  in  personal 
injury. 

 Avoid  mounting  the  unit  in  locations  exposed  to 

constant  vibration.  The  mounting  bracket  can  be 
damaged by excessive vibration, potentially causing 
the  speaker  to  fall,  which  could  result  in  personal 
injury. 

 

 

 

 

 To  avoid  electric  shocks,  be  sure  to  switch  off  the 

amplifier power when connecting the speaker. 

 Avoid installing the unit in humid or dusty locations, 

or  in  locations  exposed  to  heaters,  solvents,  acid, 
alkali,  smoke,  steam  or  direct  sunlight  (except 
outdoor-use  versions),  as  excessive  exposure  to 
these  factor  could  result  in  speaker  failure,  fire  or 
electric shock. 

 Do  not  operate  the  unit  for  an  extended  period  of 

time  with  the  sound  distorting.  This  is  an  indication 
of  a  malfunction,  which  in  turn  can  cause  heat  to 
generate and result in a fire. 

 Do not stand or sit on, nor hang down from the unit 

as this may cause it to fall down or drop, resulting in 
personal injury and/or property damage. 

 Have the unit periodically checked by the shop from 

where  it  was  purchased.  Also,  when  mounting  the 
unit on a vehicle, be sure to check both the speaker 
and  its  mounts  before  moving.  Failure  to  do  so 
could result in the speaker falling off due to damage 
or  corrosion  to  the  speaker  or  its  mounts,  and 
possible personal injury. 

 

2. GENERAL DESCRIPTIONS 

TOA’s SC-632 AS is horn speaker system designed 
for  high  efficiency,  high  power  input  and 
weatherproof capability.

 

 
 
 
 
 

 

 

 

TOA Corporation 

Indicates  a  potentially  hazardous situation which, if  mishandled, could 
result in death or serious personal injury. 

Indicates  a  potentially  hazardous situation which, if  mishandled, could 
result in moderate or minor personal injury, and/or property damage. 

 

PERINGATAN

 

WARNING 

 

PERINGATAN

 

CAUTION 

 

PERINGATAN

 

WARNING 

 

PERINGATAN

 

CAUTION 

 

Summary of Contents for SC-632 AS

Page 1: ...l injury Avoid mounting the unit in locations exposed to constant vibration The mounting bracket can be damaged by excessive vibration potentially causing the speaker to fall which could result in personal injury To avoid electric shocks be sure to switch off the amplifier power when connecting the speaker Avoid installing the unit in humid or dusty locations or in locations exposed to heaters sol...

Page 2: ... transformer 2 High impedance refers to speakers having a built in matching transformer 4 2 Connections When using two or more speakers all connected speakers must have identical impedance and input ratings 1 The total speaker impedance must be equal to the amplifier output impedance If the total speaker impedance is less than the amplifier s output impedance the speakers or amplifier could fail 2...

Page 3: ...dB of SPL IP Code IP 65 Polarity Hot Black Com White Operating Temperature 20 C to 55 C 4 F to 131 F must be free from dew condensation Finish Horn and Rear Cover HIPS white Bracket SPCC Powder Paint White Speaker cable Polyvinyl chloride insulated cabtyre cable 6mm 0 24 in diameter 400mm 17 72 in length White Dimensions 292 W x 234 H x 330 D mm Weight 1 8kg Sensitivity when used as microphone 0 d...

Page 4: ...rective 2004 108 EC Manufacturer TOA Corporation 7 2 1 Minatojima Nakamachi Chuo ku Kobe Hyogo Japan Authorized representative TOA Electronics Europe GmbH Suederstrasse 282 20537 Hamburg Germany URL http www toa jp 533 06 227 00 TOA Corporation ...

Reviews: