Program Output Connector (PGM OUT).
The Program Output Connector is bal-
anced and transformer isolated. The
nominal signal level and impedance are
+4dB and 600 ohms, respectively.
Line Output Connector (LINE OUT)
The Line Output Connector is balanced
and transformer isolated. The nominal
signal level and impedance are +4dB and
600 ohms, respectively. The output signal
is derived prior to the equalizer section.
Input Channel Connector(s) (INPUT)
The XLR connectors are balanced,
transformer isolated, and accept either
low or high impedance sources, depend-
ing on the position of the MIC/LINE
selector switch on the front panel, the
nominal signal level and impedance in the
MIC position are -64dBm and 1.5k ohms,
respectively. In the LINE position, the
nominal signal level and impedance are
-24dBm and l1k ohms, respectively.
AC Power Cord
Cord Hanger
-AUX Input Jack
(AUX IN)
This jack is unbalanced and accepts low
or high impedance sources at nominal
-20dB level. The AUX input will accept
feeds from a tape player, wireless tuner
or other high level devices.
AC Fuse (1A)
The fuse should be replaced only with
one of identical value and type.
Recording Output Jack (REC OUT)
This is a high level, high impedance
(nominal 10k ohms) unbalanced output
jack (nominal level -l0dB). This signal is
pre equalizer and suitable for feeding a
tape recorder or other high level devices,
devices.
– 4 –
Rear Panel
All manuals and user guides at all-guides.com
