Specifications
Type
Output Power
Power Band Width
Frequency Response
Total Hamonic Distortion
Inputs
Input Sensitivity/Impedance
Outputs (T)=Transformer
(D)=Direct
Output Regulation (1 kHz)
Signal to Noise Ratio
(Band Pass 20 -20,000 Hz)
Controls
Indicators
Protection
Connectors
Power Consumption
Temperature Range
Dimensions (W) x (H) x (D)
Weight
Color
Standard Accessories
Other Features
P-906MK2
P-912MK2
P-924MK2
Power amplifier
60W RMS
120W RMS
(D) 240W RMS,
(T) 220W RMS
(D) 20 ~20,000 Hz, 0.5% THD
(T) 50 ~20,000 Hz, 0.5% THD
(D) 20 ~20,000 Hz, ± 1 dB
(T) 20 ~15,000 Hz, ± 1 dB, (T) 20 ~20,000 Hz, +1 dB, -3 dB
0.01% at 1 kHz, rated output
One Input Ports : Port accepts any input module except T-01.
One Direct Input
Note
: Use of direct input prohibits use of modular input port.
Input Port : 100 mV or 1000 mV (switchable)/10k ohms
Direct Input : 100 mV or 1000 mV (switchable)/10k ohms
Main (T) : 8 ohms, 25 & 70 volts, balanced
Main (D) : 4 ohms, unbalanced
(D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load
Input level switch in 0 dBV (1000 mV) position : 108 dB
Input level switch in -20 dBV (100 mV) position : 90 dB
1 Input gain control
1 Input level switch
1 Power ON/OFF switch
1 Low-Cut switch
1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
Self-protection, with AC fuse (inside)
Self-protection, with 2AC
fuses (1 inside)
and 2DC fuses
Input
Output
AC outlet
AC power cord/plug
Card-edge connector and screw-terminal strip
Screw-terminal strip
3-pin grounding type
SJT, 3-prong type
100W
180W
120V/3A
-10°C~+60°C [12°F~140°F]
420 x 99.1 x 358 mm
[16.5 x 3 . 9 x 14.1 in.]
9.1 kg [20.1 Ib.]
10.9kg [24.0 Ib.]
420 x 151.3 x 334.2 mm
[16.5 x 6.0 x 13. 2 in.]
19.5kg [43 Ib.]
Black
1 Volume control cover (YA-920)
Output disconnected for approx. 5 seconds after switching power on.
* Specifications are subject to change without notice.
– 9 –
