15
9. ASSIGNMENT SETTINGS
It is possible to assign each input to 4 output channels (OUTPUT 1, 2, 3, and 4).
INPUTs 1 – 8
INPUTs ST 1 and 2
Assignment switch
Assignment indicator
M-864D
Assignment switch
Assignment indicator
9.1. Assignment Switches of Inputs 1 through 8
It is possible to assign each monaural input to Outputs 1 through 4.
Pressing the Assignment switch 1 causes the corresponding indicator to light, routing the input signal to the
OUTPUT 1. The Assignment switches 2 through 4 serve as the same function as the Assignment switch 1.
Assignment switch
Output destination
1
OUTPUT 1
2
OUTPUT 2
3
OUTPUT 3
4
OUTPUT 4
[Assignment setting example]
Set the Assignment switches of the inputs as the table below.
Input
Assignment switch
MONO INPUT 1
1, 2
MONO INPUT 2
2, 3
MONO INPUT 3
1
MONO INPUT 1 MONO INPUT 2 MONO INPUT 3
: Unlit
: Lit
Assignment switch
Assignment indicator
Note
Use a fine-tipped object to
press in the Assignment switch.
