background image

6

IR-310M

IR-310BC

Charging indicator (red)

Full-charge indicator 

(green)

CHARGE

FULL

ON/O

FF

7. WHEN OPERATING ON RECHARGEABLE BATTERIES

When charging, never insert rechargeable battery other than the 

specified IR-200BT battery in the IR-310M.

Charging any other than the IR-200BT battery may result in fire or 

personal injury due to battery rupture.

CAUTION

Notes

•  When operating on rechargeable battery, the optional IR-310BC Battery Charger is required. 

•  For rechargeable battery, be sure to use the optional IR-200BT battery. Do not use other battery. 

7.1. How to Charge

 Step 1. Switch the IR-310M’s power OFF.

Note

Battery cannot be correctly charged if the power is 

ON. 

 Step 2. Place  an  IR-200BT  rechargeable  battery  in  the  IR-

310M. 

(Refer to p. 5 "BATTERY INSERTION.")

 Step 3. Fully  insert  the  IR-310M  into  the  microphone 

receptacle of the IR-310BC Battery Charger. 

The  IR-310BC’s  charging  indicator  lights  red  and 

charging begins. 

Charging is completed in about 3 hours and the IR-

310BC’s full-charge indicator lights green. 

Notes

•  Insert  the  IR-310M  so  that  both  front  sides  of 

the IR-310M and the IR-310BC face to the same 

direction as shown at right.

•  If the red charging indicator does not light even if 

the IR-310M has been inserted into the charger, 

check to see if the IR-310M has been correctly 

inserted. 

•  The  IR-310M  becomes  warm  after  charging 

completion, however this is not a failure. 

Note:  For more information, please read the instruction 

manual  enclosed  with  the  IR-310BC  Battery 

Charger. 

Summary of Contents for IT-310M













Reviews: