Toa IR-702T, Operating Instructions Manual

Page: 21 / 56

21
Coaxial cable
Chassis
Machine screw M4 x 10
(supplied with the IR-520R)
Microphone stand
Mounting screw: U 5/16
Stand mounting bracket
(supplied with the IR-520R)
Body case
3
2 , 4
1
5
Case fixing screw
Note
No need to remove this
case fixing screw.
Step 1. Attach the stand mounting bracket (supplied with the IR-520R) to a microphone stand.
Applicable screw size: U 5/16
Step 2. Loosen 2 case fixing screws, then detach the body case.
Step 3. Secure the chassis to the stand mounting bracket using 2 machine screws M4 x 10 (supplied with the
IR-520R).
Step 4. Attach the body case to the chassis.
Step 5. Connect the coaxial cable.
Note
For the microphone stand installation, refer to the instruction manual attached to the microphone stand.
13.2. Mounting on a Microphone Stand