background image

TABLE OF CONTENTS

Update history

IR-200M, IR-300M  Y

1

No.833-73-809-10

INFRARED WIRELESS MICROPHONES

IR-200M, IR-300M

Y

IR-200M

IR-300M

HS0905

NOTE ON REPAIR WORK SAFETY  ......................................................................................................... 2
GENERAL DESCRIPTION ......................................................................................................................... 2
SPECIFICATIONS

• IR-200M  ........................................................................................................................................... 3
• IR-300M  ........................................................................................................................................... 3

NOMENCLATURE AND FUNCTIONS

• IR-200M  ........................................................................................................................................... 4
• IR-300M  ........................................................................................................................................... 4

DISASSEMBLING INSTRUCTIONS (IR-200M) ......................................................................................... 5
ADJUSTMENT PROCEDURE

• Measuring instruments to be used ................................................................................................... 6
• Connection diagram ......................................................................................................................... 6
• Adjustment points and input/output .................................................................................................. 7
• Adjustment and Check Method ........................................................................................................ 8

OPERATION FLOW

• At power on ...................................................................................................................................... 9
• From turning off the power switch to when the operation stops ....................................................... 9

TROUBLESHOOTING

• IR-200M  ......................................................................................................................................... 10
• IR-300M  ......................................................................................................................................... 10

BLOCK DIAGRAMS AND OPERATION DESCRIPTION

• IR-200M  ......................................................................................................................................... 11
• IR-300M  ......................................................................................................................................... 12

SCHEMATIC DIAGRAMS

• IR-200M

MAIN PCB ................................................................................................................................... 13
SUB PCB  .................................................................................................................................... 14

• IR-300M

BATT PCB ................................................................................................................................... 15
IR PCB  ........................................................................................................................................ 16
SW PCB  ...................................................................................................................................... 17

MOUNTING DIAGRAMS AND PARTS LISTS

• IR-200M

MAIN PCB ................................................................................................................................... 18
SUB PCB  .................................................................................................................................... 18
Charge contact PCB  ................................................................................................................... 18
PARTS LIST ................................................................................................................................ 18

• IR-300M

BATT PCB ................................................................................................................................... 20
IR PCB  ........................................................................................................................................ 20
SW PCB  ...................................................................................................................................... 20
Charge contact PCB  ................................................................................................................... 20
PARTS LIST ................................................................................................................................ 20

EXPLODED VIEWS AND PARTS LISTS

• IR-200M  ......................................................................................................................................... 22
• IR-300M  ......................................................................................................................................... 23
• Strap replacement procedure (IR-300M)  ....................................................................................... 24

TABLE OF CONTENTS

Summary of Contents for IR-200M

























Reviews: