manualshive.com logo in svg

Toa IP-A1PC580R, Instruction Manual, Page: 9 / 16

Share
Download
Toa IP-A1PC580R Instruction Manual Download Page 9

9

8. INSTALLATION PRECAUTIONS

Notes

• Since the safety wire is not supplied with the IP speaker, be sure to prepare it separately.

• When attaching the safety wire, be sure that it is fastened securely to the safety wire attachment 

ring.

Observe the following instructions when attaching the safety wire. Failure to do so could 

result in the speaker falling, potentially resulting in personal injury.
• Select  a  safety  wire  that  is  strong  enough  to  withstand  the  total  weight  of  the  unit  being 

mounted.

• Use a wire with a diameter larger than 1.5 mm or 0.06".

• Attach the safety wire so that it does not become slack.

CAUTION

9. INSTALLATION

9.1.  IP-A1PC580R

Use back can HY-BC580U if UL 2043 (use in 

air handling spaces) is required.

All  wire  entry  knockouts  should  use  metal 

conduit  and  metal  fitting  only.  No  rubber 

bushings on back can.

Knockout

Ceiling tile

IP-A1PC580R

HY-BC580U

 (option)

Mounting hole:
ø228.6 mm (ø9")

Machine screw

5 x 38 (accessory)

Safety wire attachment

From PoE

switching hub

Connect the IP speaker to the PoE Switching hub 

using a LAN cable (straight UTP or STP cable, both 

rated at Category 5 or greater and fitted with RJ45 

connectors).

Compatible switching hubs:

Switching hubs conforming to PoE (IEEE802.3 af 

Class 3) specifications.

Summary of Contents for IP-A1PC580R

















Reviews:

No comments