Toa IP-1000AF, User Manual

Page: 6 / 25

2-2
Chapter 2: Products Description
2.2 Interface Description
Front Back
①
INPUT SIGNAL: input indicator light
②
STATUS: status indicator light
③
POWER: power indicator light
④
Grounding switch
⑤
INPUT VOLUME: input volume adjusting knob, the input volume adjusting, clockwise direction is increase
the volume, counterclockwise is decrease the volume.
⑥
RESET: pressing the button to restore the factory default IP (or upgrade firmware )
、
broadcasting IP.
Status Operation
Forced to restore the IP address Electricity status, pressing the button in 3s
Forced into the firmware upgrade
page
Pressing the button before electricity, and keep it in 5s then
loosen it
Broadcasting IP
Electricity status without network, quickly pressing and
then release it
⑦
LAN: network interface
⑧
Power interface: DC24V/1A
⑨
Control input/output interface
IN: control input interface, E is control input reference place, H is control input interface, when the two pins
is short circuit, IP audio interface unit will execute the operation automatically, which is setting by browser.
OUT: control output interface, “NC” is control output normally closed contacts,
“NO” is control output normally open contacts, “C” is control output public contacts.
⑩
Audio input/output interface
IN:
audio input interface, E is audio input reference place, H is audio signal input ,1Vrms/10KΩ
，
unbalance.
OUT:
audio output interface, E is audio output reference place, H is audio signal output,1Vrms/600Ω
，
unbalance
.