Step 1. Attach the speaker bracket to the
speaker.
1-1. Remove the screws on the speaker's
rear panel.
Note
The screws removed in Step 1-1
cannot be used.
1-2. Mount the speaker bracket to the
SR-F08 using the hex head bolts
supplied with this bracket.
2. GENERAL DESCRIPTION
The HY-WM08 Wall Mounting Bracket is designed to mount the speaker system on indoor wall. It consists of the speaker
bracket and the wall bracket.
3. INSTALLING THE SPEAKER TO THE WALL
3.1. Mounting Drawing
[Exploded view of the bracket components] [Completed installation view]
SR-F08
Bracket component
(Speaker bracket)
Safety bolt
Bracket component
(Wall bracket)
Plain washer
Horizontal angle adjustment nut
3.2. Installation
• Use safety wires when installing speakers.
If not used, personal injury could result if a speaker should accidentally
fall.
• Tighten the bolts securely, as instructed below.
Failure to follow instructions precisely could result in a falling speaker
and potential personal injury.
· Ensure that all bolts are securely inserted as far as their threads go,
then securely fasten each bolt with a nut.
· Tighten all the bolts with the designated tightening torque.
For tightening, use a Phillips screwdriver, or open- or box-end wrench.
WARNING
1
-2
1
-1
Bracket component
(Speaker bracket)
Hex head bolt M8 x 30
(Accessory, 4 places)
Tightening torque: 8 N·m
