Step 2. Adjust the vertical angle of the SR-F04.
Vertical angle adjustment range:
0° to 30° downward
Step 3. Install the wall bracket to the wall.
3-1. Remove the safety bolt from the wall bracket.
3-2. Install the wall bracket to the wall using 6 bolts.
Step 4. Insert the bolt on the speaker bracket into the
notch in the wall bracket so that the notch is
positioned between the bolt and plain washer.
30°
[Example: Tilted 30° vertically]
Bolts and nuts used to fix the bracket on a wall are not included.
Prepare those that are appropriate for the wall's structure and composition. Failure to do so
may cause the speaker to fall, resulting in personal injury.
WARNING
Safety bolt
Plain washer
(for M8)
Plain washer
(for M8)
Nut (for M8)
Bracket Component
(Wall bracket)
3
-1
3
-1
3
-2
[Dimensional drawing of the wall bracket]
80 (3.15")
45
(1.77")
45
(1.77")
235 (9.25")
or more
Ceiling
Unit : mm
Note
Be sure to use the 6 mounting holes in
the wall bracket.
6-ø10.2 (0.4")
Plain washer
Bolt
4
Plain washer
Wall
Bracket component
(Speaker bracket)
Bracket component
(Wall bracket)
Owing to the unit’s size and weight, be sure that at least two persons are available to install the
unit. Failure to do so could result in personal injury.
WARNING
