5. INSTALLING TO THE SPEAKER
Step 1. Remove 1 each screw on the optional speaker
system SR-F08's top and bottom surfaces.
Step 2. Attach the bracket to the SR-F08 with the
supplied hex head bolts.
Note
The screws removed in Step 1 cannot be used.
Step 3. Attach this bracket to the Bracket B of the speaker
mounting bracket to join.
For attachment, use the 4 hex head bolts supplied
with the speaker mounting bracket to join.
Note
Use all 4 hex head bolts and securely tighten
them.
Step 4. Using the Bracket A of the speaker mounting
bracket to join, install the speaker to the desired
location.
For mounting the speaker (attached with the
bracket) to the Bracket B, use the 4 hex bolts
supplied with the speaker mounting bracket to
join.
Notes
• For the installation of the Bracket A, read the
instruction manual of the speaker mounting
bracket to join.
• Use all 4 hex head bolts and securely tighten
them.
Step 5. Loosen the hex head bolts installed in Step 2,
and adjust the vertical angle of the SR-F08.
Then, securely retighten the bolts.
SR-F08
HY-C0801
HY-W0801
HY-B0801
Bracket A
4
3
Hex head bolts supplied with
the HY-C0801,HY-W0801, or
HY-B0801 (M8, 4 places)
Bracket B
(component of
the HY-C0801,
HY-W0801, or
HY-B0801)
Tightening torque: 8 N·m
SR-F08
Hex head bolt M8 x 35
(accessory,
1 each on both sides)
SR-F08
Hex head bolt M8 x 35
(accessory,
1 each on both sides)
Tightening torque: 8 N·m
