When mounting Speaker
When mounting Speaker
When mounting Speaker
When mounting Speaker Bracket
Bracket
Bracket
Bracket
•
When installation the speaker bracket required 2 or more people to handle it, If the unit fall and result in
personal injury.
•
Avoid the sharp edge of the unit to prevent any injury.
•
Conduct regular check to detect any damage to the unit or corrosion to the speaker bracket as early as
possible. Failure to do so may cause the speaker to fall, result in personal injury.
2
2
2
2
.
.
.
. PRECAUTIONS BEFORE INSTALLATION
PRECAUTIONS BEFORE INSTALLATION
PRECAUTIONS BEFORE INSTALLATION
PRECAUTIONS BEFORE INSTALLATION
Adverse effects of weather allows the speakers bracket to be damaged, if neglected can cause the speaker to
fall and
result in personal injury.
3.
3.
3.
3.
SPEAKER BRACKET
SPEAKER BRACKET
SPEAKER BRACKET
SPEAKER BRACKET
3.1.
3.1.
3.1.
3.1. Rear
Rear
Rear
Rear Stack Bracket
Stack Bracket
Stack Bracket
Stack Bracket
3.2. Side Stack Bracket
3.2. Side Stack Bracket
3.2. Side Stack Bracket
3.2. Side Stack Bracket
4. INSTALLATION
4. INSTALLATION
4. INSTALLATION
4. INSTALLATION
When stacking 2 pieces of speakers, join the bottom side of each speaker.
Step 1.
Step 1.
Step 1.
Step 1. join the bottom side of each speaker, by placing the speakers on the floor (refer to below
illustration).
Step 2
Step 2
Step 2
Step 2. Connect the speaker cable to input terminal of the two speakers,
where the cable must pass through
the hole in the wall bracket
so that the cable do not obstruct the speaker from coinciding with the
wall, and match the impedance to be used (Low impedance or High impedance)
“
“
“
“
Do not connect low impedance to high impedance, because it can cause damage to speakers or
Do not connect low impedance to high impedance, because it can cause damage to speakers or
Do not connect low impedance to high impedance, because it can cause damage to speakers or
Do not connect low impedance to high impedance, because it can cause damage to speakers or
amplifiers that are
amplifiers that are
amplifiers that are
amplifiers that are used
used
used
used ”.
”.
”.
”.
Step 3.
Step 3.
Step 3.
Step 3. Install rear stack bracket using the screws provided (BH Screw M5X15 SUS 3-SEMS).
CAUTION
CAUTION
CAUTION
CAUTION
