Toa HF-250M, Operating Instructions Manual

Page: 13 / 32

4. Setting calling party station number indication
When using the HF-250M with data transmitting unit DT-E70, the calling party's station number can be
displayed on the HF-250M's liquid crystal display.
on the liquid crystal display. Switch the [REGISTER] switch ON, displaying
key to display Press the
Press any one of the dial keys ( ), and the currently registered dial number is displayed.
Referring to Table 1, dial an enter registration number to be registered, which will be shown on the
display as dialed.
Note : To cancel a misdialed number, press the key and repeat the procedure from step
key after the correct number is displayed, displaying
Press the
Switch the [REGISTER] switch OFF after completing registration.
Note : Set channel selection to DT-E70's CH6 or CH7. For details, refer to the chapter" Data transmitting
unit (DT-E60) of CP series Functions and operating instructions" manual.
< Table 1 >
Hardwired Station
Number
Enter Registration
Number
Hardwired Station
Number
Enter Registration
Number
- 1 3 -