background image

3

2. GENERAL DESCRIPTION

The F-2852C is a 2-way, flush-mounted ceiling speaker that offers a wide frequency range and high-quality
sound output. 
Use of its supplied and optional mounting hardware permits versatile mounting to match a wide range of
applications and installation locations.

3. FEATURES

• Two-way, bass-reflex speaker system designed to provide a wide frequency range and high power handling

capability.

• Ideal for locations that have high ceilings or require true-to-life sounds. 

• Uniform sound output levels are achievable not only in the position directly under the speaker, but also over

a wide radius. (Coverage angle is approximately 110°.)

• Because the speaker is provided with both low- and high-impedance operating capability, it can be used in

many different applications. Front panel-mounted input selector switch permits easy verification and change
of current impedance settings, even after installation.

• Easy installation. Can be quickly and accurately mounted to ceilings and walls. 

• Rotating front grille can be installed quickly and conveniently.

• Attractive exterior design specially created by an interior designer blends naturally with any architectural

space, enhancing the immediate area's sense of harmony. 

• Optional mounting hardware permits installation in weak ceiling panels.

Summary of Contents for F-2852C













Reviews: