background image

10

8.4. Ceiling Mounting

Use the supplied joint bracket and speaker bracket.

Note

Speaker coverage angles can only be adjusted in the vertical direction (Max. 45º downward). 
Adjust the speaker's tilt angle within the shaded range shown below:

Vertical orientation

[Installation example]

[Speaker angle vs. Bracket position]

30º

45º

15º

Joint bracket

Speaker 
bracket

0º 

(horizontal)

45º downward

b

b

a

a

0° 

(horizontal)

45 mm

45 mm

4-ø6 mm

ø10 mm

[Joint bracket mounting dimensions]

Step 1.

Mount the joint bracket to the ceiling surface. 

Note

Hardware used for mounting the joint bracket to the ceiling is
not supplied. 

Step 2.

Attach the speaker bracket to the speaker's bottom using the
supplied screws.

Machine screw
M5 x 20 (with 
plain washer and
spring washer)

1

3

5

2

Fixing bolt M6 x 85

Speaker unit

Front panel logo*

Joint bracket

Fixed mounting screw hole 
(4 holes)

Anchor bolt mounting hole

Speaker bracket

Ceiling board

Anchor bolt

Joint bracket

Effective length

• Use an appropriate anchor bolt for supporting 
  the full weight of the speaker and for the size 
  of mounting hole in the joint bracket.

• Ensure that the effective length of the anchor 
  bolt is 25 mm or less.
• When speaker rotation capability is not desired, 
  secure with the 4 fixed mounting screw holes.

Notes

A s   h o l e   s e a l s   a r e  
adhered over the holes, 
remove them using a 
p o i n t e d   t o o l   b e f o r e  
attaching the bracket.

* Changing the orientation of the front panel logo

The front panel logo is affixed to the mesh net using
double-faced tape. Peel off the logo carefully and
reaffix it in the proper orientation. 

Summary of Contents for F-2000B





















Reviews: