background image

11

10. SPECIFICATIONS

Power Source 

Alkaline battery (LR6): 6 pieces (9 V DC) or 4 pieces*

1

(6 V DC) 

Rechargeable nickel metal hydride (NiMH) battery (HR15/51): 

6 pieces (7.2 V DC) or 4 pieces*

1

(4.8 V DC)

Black manganese battery (R6PU): 

6 pieces (9 V DC) or 4 pieces*

1

(6 V DC) 

Output

6 W (rated) and 10 W (max) when 6 AA batteries (9 V DC) are used. 
3 W (rated) and 4 W (max) when 4 AA batteries*

1

(6 V DC) are used.

Battery Life 

Voice operation*

2

: Approx. 8 hours (when 6 or 4*

1

alkaline

batteries are used)
AUX stereo input operation (music reproduction)*

3

Approx. 4.5 hours (when 6 or 4*

1

alkaline batteries are used) 

Approx. 5.5 hours (when 6 or 4*

1

NiMH batteries are used) 

Approx. 3 hours (when 6 or 4*

1

black manganese batteries are used) 

Audible Range*

4

Voice operation: Approx. 80 m or 87.49 yd (when 6 alkaline
batteries or NiMH batteries are used) 
Approx. 40 m or 43.74 yd (when 4*

1

alkaline batteries or NiMH

batteries are used) 

Note:

The transmission distance when black manganese
batteries are used is approximately 80% of each of the
above mentioned distances. 

Reproducing Frequency  300 Hz – 14 kHz (deviation: –26 dB) 
Range 
Headset Microphone

Ear-on type, elrectret condenser microphone, 
sensitivity: –47 dB (0 dB = 1 V/1 Pa, 1 kHz), cord length: 1.3 m
(4.27 ft), 3.5 mm (1/8") mini-plug (monaural), with headband and
windscreen 

Input

MIC: –30 dB*

5

, 3 k

Ω

, 3.5 mm (1/8") monaural mini-jack, phantom

power supply. 

AUX*

6

: –10 dB*

5

, 2 k

Ω

, 3.5 mm (1/8") stereo mini-jack (supporting

monaural applications*

7

Maximum Belt Length 

55 – 120*

8

cm (1.8 – 3.94*

8

ft), 90 – 160*

9

cm (2.95 – 5.25 *

9

ft) 

(when wearing a ER-1000PJ Extension Belt) 

Operating Temperature 

0 to 40 °C (32 to 104 °F)

Finish 

Front case: ABS resin, dark grayish purple 
Rear case:  ABS resin, dark grayish purple 
Grille: 

Surface-treated steel plate, dark grayish purple, paint 

Belt: 

Elastic rubber, black 

Dimensions 

133 (w) x 96 (h) x 222 (d) mm (belt excluded) 
(5.24" x 3.78" x 8.74") 

Weight 

Main PA unit (belt included, batteries excluded): 480 g (1.06 lb)
Headset microphone: 50 g (0.11 lb)

*

1

When the supplied battery spacers are used. 

*

2

Battery life during voice output usage represents the period of time when the Personal PA is
continuously used with the volume control set to a position that does not cause feedback.
Reference standard: JEITA (Japan Electronics and Information Technology Industries
Association) TT-4501B 

Summary of Contents for ER-1000 WR













Reviews: