background image

133-12-037-2C

URL:  http://www.toa.jp/

9. SPECIFICATIONS

* 0 dB = 0.775 Vrms

Note:

The design and specifications are subject to change without notice for improvement. 

• Accessories

Frequency Response

20 Hz to 20 kHz ±1 dB 

Total Harmonic Distortion Less than 0.01% (at 1 kHz, all sliders at 0 position,rated output)

Center Frequency

31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 

315 Hz, 400 Hz, 500 Hz, 630 Hz, 4 kHz, 5 kHz, 6.3 kHz, 8 kHz, 10 kHz, 

12.5 kHz, 16 kHz

Rated Input Level

+4 dB* (INPUT LEVEL CONTROL set for 0 position)

Rated Output Level

+4 dB*, 600 Ω load

Maximum Input Level

+20 dB* at 1 kHz

Maximum Output Level

+20 dB* with 600 Ω load

Input Impedance

10 kΩ

Output Impedance

600 Ω

Hum and Noise

–94 dB* (EQ in, all sliders at 0 position, 20 Hz – 20 kHz BPF)

Indicators

A red LED for output and input clipping

A green LED for equalizer IN

A green LED for power ON

A green LED for filter IN

Controls

Equalizer Sliders ±12 dB

Input Level Control ±12 dB

Highpass Filter 12 dB per octave

Adjustable Cutoff Frequency: 15 Hz to 300 Hz

Lowpass Filter 12 dB per octave/6 dB per octave

Adjustable Cutoff Frequency: 2.5 kHz to 30 kHz

AC Line Voltage

E-1231 H: 220 – 240 V AC, 50 Hz/60 Hz

E-1231 US: 120 V AC, 60 Hz

Power Consumption

11 W

Finish

Black

Dimensions

483 (w) x 88 (h) x 317 (d) mm (19" x 3.5" x 12.5")

Weight

4.5 kg (9.92 lb)

Security cover  ............................................ 1

Screw for security cover ............................. 2

Short piece ................................................. 2

Fuse  ........................................................... 1

Rack mounting screw ................................. 4

Summary of Contents for E-1231









Reviews: