7. UNIT ID NUMBER SETTING
To control two or more units, give each unit a separate number called a unit ID number, then send the setting
data from a personal computer. The ID numbers must be consecutive from No. 1 to No. 30, and be set in
advance.
Setting the number
1. Open the front pocket.
2. Switch on the power.
3. Hold the lever of the unit ID number setting switch to the right.
4. While holding the lever, operate the front- mounted memory/unit number selection key to show the desired
number on the memory/unit number display.
5. Push the unit ID number indication key to register the number being displayed.
6. Release the unit ID number setting switch.
Notes
The ID number is factory preset to No. 1.
Make sure the same number is not registered twice.
To confirm the set number, press the unit ID number display key located on the front panel.
8