Specifications are subject to change without notice.
(0906) 833-52-402-10 u
TOA Corporation
www.toa.jp
TOA Corporation C-CC704 3/3
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
GENERAL REQUIREMENTS
The product specified shall be a motorized speed dome camera system
designed for indoor surveillance applications. The camera system
consists of a high resolution CCD camera using 1/4-inch type CCD
imager with a motorized 10X zoom, auto-iris, auto-focus lens; electronic
12X digital zoom; a high speed, continuous 360 degree/second, pan/tilt
mechanism; programmable privacy masking; internal CPU circuitry with
external programming via RS-485 from camera remote control unit or
RS-232 from PC with TOA camera setup software; compatible with
Pelco-D, Bosch and Panasonic protocols.
Alarm inputs: (4) Four channels shall be provided to trigger preset
selected targets.
Titling options: To facilitate camera use, various titles can be input and
displayed on the monitor.
In addition to camera and position titles, other titles for display include:
trace title (displayed while the trace function is on), tour title (displayed
when tour function is activated) and alarm title (displayed when an alarm
input is received).
Preset operation start with Timer program function: The camera shall
conveniently be set to begin operation at a preset time with a built-in
timer. The timer can be set for a specific date, day of the week or daily.
Fully automatic operation mode shift includes sensitivity boost, AGC,
normal condition and backlight compensation to smoothly transition as
lighting conditions change.
Route tracing function: The traces of joystick movement can be recorded
as a route for up to 120 seconds. (8) Eight different routes can be
programmed.
Tour function: Among 64 preset positions, up to 60 steps can be
programmed as a tour pattern to automatically monitor preset points in
order. Up to (8) eight tour patterns can be programmed. Any tour
program is able to have a different travel pattern that can be activated by
an alarm input or timer.
Programmable Alarm function: Desired camera operations such as
position replay, touring and tracing can be programmed to activate when
the camera receives an alarm input. The camera is equipped with (4)
four alarm inputs and each alarm input can be set to respond with
different preprogrammed operation.
Outdoor Installation: The camera shall fully conforms to IP66 standards.
Other functions shall include 64 preset positions, automatic positional
correction (automatic positional deviation) and refresh function (slip-ring
cleaning).
The camera shall have flexible installation options utilizing the wide
range of mounting brackets available.
CAMERA SPECIFICATIONS
Image device:
1/4 type CCD
Horizontal Resolution:
470 TVL (at center) NTSC
Signal to Noise Ratio:
50dB
Minimum Illumination:
High-sensitivity function OFF: 2 lx (50 IRE), 0.4 lx (20 IRE)
High-sensitivity function ON: 0.1 lx (50 IRE), 0.03 lx (20 IRE)
Backlight compensation:
ON/OFF
High-Sensitivity Function:
Slow shutter mode (64 times max.)
White Balance:
ATW/AWB
Flicker Reduction:
Automatic correction
Electronic Zooming:
12x zooming
Auto-Focus:
Stop AF
LENS SPECIFICATIONS
Zooming:
10x
Effective Focal Length:
f=3.8-38mm (10x)
Effective Angle of View:
Horizontal: 50.7
°
(W) – 5.4
°
(T)
Vertical: 39.1
°
(W) – 4.1
°
(T)
Maximum Aperture:
F 1.8 (W) – F 2.4 (T)
Zoom Speed:
WIDE end to TELE end
Approx. 2.1 sec (preset operation)
Approx. 2.1 sec (manual operation)
PAN/TILT HEAD SPECIFICATIONS
Rotating Range:
Panning: Endless 360
°
Tilting: +2
°
to -90
°
Rotating Speed:
Panning/Tilting: 200
°
/sec max. (preset operation),
200
°
/sec max. (manual operation)
ELECTRICAL SPECIFICATIONS
Power Source:
24V AC 50/60 Hz
Power Consumption:
11W
Control:
RS-485
Video output:
VBS 1.0V(p-p), 75
Ω
MECHANICAL SPECIFICATIONS
Dimensions:
Camera section external diameter: ø157 x 159 mm (H)
(ø6.18” x 6.26”)
Dome external diameter: ø99mm (ø3.9”)
Weight:
1.8 kg (3.97 lb)
Rotating range:
Panning: Endless 360
°
rotation,
Tilting range: +2
°
to -90
°
Rotating speed:
Panning/Tilting: 200
°
/sec max. (preset operation),
200
°
/sec max. (manual operation)
Finish:
Case, decorative frame: Die-cast aluminum, light gray, paint
Dome cover: PC resin (transparent)
ENVIRONMENTAL SPECIFICATIONS
Operating temperature:
-10
°
C to +50
°
C (14
°
F to +122
°
F)
Operating humidity:
Under 90% RH (no dew condensation)
CERTIFICATIONS AND RATINGS
Dust/Water protection:
IP66
This device complies with part 15 of FCC rules.
Safety:
UL Listed
The speed dome camera shall be TOA model C-CC704.
The remote controller shall be TOA model RM-700.
The wall mounting bracket shall be TOA model C-BC704W.
The flush ceiling mounting bracket shall be TOA model C-BC704U.
The pole mounting bracket shall be TOA model C-BC771PM.
The pendant-mount adapter shall be TOA model C-BC704PB.
