3
Note
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Modifications
Any modifications made to this device that are not approved by TOA Corporation may void the authority
granted to the user by the FCC to operate this equipment.
NTSC version complies with Part 15 of the FCC Rules.
Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the security aspects
of this product. UL has only tested for fire, shock or casualties as outlined in UL's Standard(s) for
Safety. UL Certification does not cover the performance or reliability of the security hardware and
security operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY
SECURITY RELATED FUNCTIONS OF THIS PRODUCT.
3. HANDLING PRECAUTIONS
•
Do not direct the camera lens to the sun or strong lighting or light reflection.
•
Do not give the camera a great shocks or vibration, as this will damage the camera.
•
It is recommended that the camera be always used in locations where the ambient temperature ranges from
–10°C to +50°C and humidity levels of less than 90% to ensure that no condensation is formed.
•
To clean, wipe with a dry soft cloth. Never use benzene, thinner or chemically processed towel as the unit's
plastic or other parts may be deformed or discolored.
•
When dust has settled on the unit's lens, lightly clean using a commercial camera blower or cleaning paper.
•
Installing the camera cables in close proximity to fluorescent lamps or other electrical appliances can
downgrade the picture quality. In such cases, change the wiring.
•
If there is a strong electric or magnetic field near the camera, such as television transmission antennas,
motors or transformers, this may distort or roll the monitor picture. In such cases, run the entire wiring route
through metal conduit tubing.
•
Use the external power supply unit of the following rating when the camera is operated on 12 V DC.
12 V DC, over 1.0 A
•
If the Day/ Night mode is used, the subject may go out of focus when the display is switched between color
and B&W modes. In such cases, use a lens designed for visible light up to the near-infrared region.
2. GENERAL DESCRIPTION
This high-sensitivity color camera automatically switches from color to black-and-white mode under poor
lighting conditions to improve sensitivity. The 64 X electronic sensitivity enhancer and wide dynamic circuitry
combine to ensure clear surveillance in dark locations or in backlit conditions. With the menu key, camera's
function can be set, and color and brightness can be adjusted. Also they can be remotely controlled in
combination with the camera remote unit.