Surface treated steel plate, black, paint
132 (W) X 30 (H) X 70 (D) mm
1.1 kg
C-CC514, C-CC564
C-BC511C, C-BC511C-S
Finish
Dimensions
Weight
Applicable camera
Applicable cover
Note: The design and specifications are subject to change without notice for improvement.
2
4
5
1
3
Safety wire (accessory)
Anchor bolt
Ceiling
Safety wire
(supplied with the
combination camera)
C-BC511A
Celing Mounting
Bracket
Base unit
C-CC514
or C-CC564
Combination
Camera (optional)
Camera unit
C-BC511C
or C-BC511C-S
Celing Mounting
Cover (optional)
1. Attach the ceiling mounting bracket to
the ceiling mounting anchor bolt
installed into the upper ceiling.
2. Attach the base unit to the ceiling
mounting bracket.
Note
Use the supplied camera mounting
screws when attaching the base unit to
the ceiling mounting bracket.
3. Connect cables and attach the camera
unit to the base unit.
4. Align the ceiling mounting cover’s
positioning mark with that on the base
unit.
5. Rotate the ceiling mounting cover
clockwise until it locks into place.
Be sure to carefully read the installation
manual supplied with the camera.
[ Main body mounting view ]
• Accessories
Camera mounting screw ............................ 4
Safety wire ................................................. 1
Pattern paper ............................................. 1
Space between
suspended ceiling panel
and upper ceiling
100 mm or more
Ceiling plate
40 mm or less
[ Installation dimensional diagram ]
4. INSTALLATION
5. SPECIFICATIONS
Printed in Japan
133-05-377-10
