TOA Electronics, Inc.
Step 5:
Turn the knurled fastener on pole to adjust height and rotate bracket to proper orientation.
After Microphone is installed use the thumb screw fasteners to adjust the angle.
Step 6:
With the Microphone Bracket secured, follow instructions from the AM-1 Microphone Bracket to
install the Microphone to the mounting bracket (see step 8).
*For suspended ceiling with drop-in tiles, it is highly recommended to use a backer panel support above
the ceiling tile (1/4 inch MDF or equivalent) to assure structural stability. Also, recommend use of toggle
bolts (drilling 5/8
” holes) or appropriate fixing screws for >10lb weight load.
END RESULT OF INSTALL
Knurled Fastener
Thumb Screw
