TOA Electronics, Inc.
INSTALLATION MANUAL
AM-1 MOUNTING BRACKET
HY-AM1B-Q
with HEIGHT / ANGLE ADJUSTMENT
HY-AM1W-Q
1. GENERAL DESCRIPTION
The AM-1 mounting bracket with height and angle adjustment is an optional kit for mounting
the AM-1 Real-time Steering Array Microphone on the ceiling. The mount is available in
Black (HY-AM1B-Q) or White (HY-AM1W-Q).
The HY-AM1x-Q includes:
ADJUSTABLE BRACKET
M4 SCREWS (X4)
ADJUSTABLE POLE
Installation Notes:
*
Installation of the AM-1 with this product requires the use of MB-AM1B-Q (black) or MB-AM1W-Q
(white) Microphone Bracket (sold separately).
**
The mounting screws and wall anchors are provided with the MB-AM1 Microphone Bracket.
Suspended from Hard Ceiling
:
Step 1:
Line up the bottom of adjustable pole to surface, mark hole locations and drill holes
(1/4 inch (approx. 6mm) diameter) for plastic wall anchors.
Step 2:
Insert anchors from AM-1 Mounting Bracket into holes until flush.
Step 3:
Align pole flange on surface, use #10 flat head screws to secure in place by tightening screws.
Step 4:
Align AM-1 Microphone Bracket (not shown) to the angle adjusting bracket, use the
M4 screws to secure the microphone bracket to the adjustable bracket.
