Specifications
Enclosure:
Vented (bass reflex) type
Speakers:
Low Frequency, 18" woofer
Mid Frequency, CD Horn plus compession driver
High Frequency, Horn tweeter
Power Handling Capacity
Continuous Pink Noise:
120 watts RMS of band-limited pink noise
(50 Hz~20 kHz)
Countinuous Program:
360 watts
Impedance:
8 ohms
Sensitivity:
102 dB (1W/1m)
Input Panel
FULL RANGE INPUT
Connects to the output of power amplifier. This is the
input jack when used as a full range speaker system.
MULTI-AMP (3-WAY) INPUTS
Connects to corresponding power amplifiers for high,
mid and low frequency ranges when driving the speaker
system with multi-amp operation.
Level Controls
Frequency Response:
40 Hz~20 kHz
Crossover Frequencies:
600 Hz, 8kHz
High and Mid Frequencies Level Controls:
0 ~ -10 dB (with an "OFF" position)
Input Terminals:
¼
"
Phone jacks for a full-range, biamp, triamp and
chaining
Finish (Enclosure):
Polyester in grey color
Dimemsions:
820(H) X 560(W) X 450(D)mm
32.3(H) X 22.0(W)X 17.7(D)inches
Weight:
45 kg (99.2 Ibs)
FULL RANGE OUTPUT
Make bridge connection of this output to the full range
input of another system when driving two speaker
systems with one power amplifier.
MULTI-AMP (3-WAY) OUTPUTS
For bridge connection of multi-amp operation.
BI-AMP OUTPUTS
For bridge connection-of bi-amp operation.
CAUTION:
DO NOT USE THE BI-AMP AND MULTI-AMP JACKS
UNLESS THE SPEAKER SYSTEM IS DRIVEN UNDER
Bl- AND MULTI-AMPLIFIERED SYSTEM.
CONNECTING THE AMPLIFIER OUTPUT FOR THE
FULL RANGE TO THE MULTI- AND BI-AMP INPUT
JACKS MAY DAMAGE THE SPEAKER.
Adjusts the sound level of the mid and high
frequencies when driving the speaker system as a
full range speaker system. Make the level setting
according to the environmental conditions,
although almost flat frequency response is
obtainable so far as the level controls remain
within the "NORMAL" ranges.
MID FREQUENCY LEVEL CONTROL
HIGH FREQUENCY LEVEL CONTROL
Frequency Response (1W/1m: Swept
1
/
3
Octave Pink Noise)
: Mid & high level controls at NORMAL position
: Mid & high level controls at MAX position
Printed in Japan
133-01-204-80
Toa Electric CO., Ltd.
MADE IN JAPAN
Bl-AMP INPUTS
Connects to corresponding power amplifiers for high/mid
and low frequency ranges when driving the speaker
system with bi-amp operation.
