TNG Venice 49cc Owner'S Manual Download Page 64

Page: 64 / 65

Appendix 64

No dealer is authorized to modify this CMSI Limited Emission Control System Warranty.

IV.

LEGAL RIGHTS. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

THIS WARRANTY IS IN ADDITION TO THE CMSI LIMITED MOTORCYCLE

WARRANTY.

VI. ADDITIONAL INFORMATION. Any replacement part that is equivalent in performance

and durability may be used in the performance of any maintenance or repairs. However, CMSI is

not liable for these parts. The owner is responsible for the performance of all required maintenance.

Such maintenance may be performed at a service establishment or by any individual. The warranty

period begins on the date the motorcycle is delivered to an ultimate purchaser.

Summary of Contents for Venice 49cc


































































Search results

Summary of Contents for Venice 49cc

Reviews:

Related manuals for Venice 49cc

Brands by name

Popular brands

TNG Venice 49cc, Owner'S Manual

Search results

Summary of Contents for Venice 49cc

Reviews:

Related manuals for Venice 49cc

Brands by name

Popular brands