background image

Warranty Time Period for 49cc scooter models

Coverage Begins

The date the motorcycle is delivered to the first retail purchaser.

Warranty

CMSI shall repair or replace, at its option, any part (including parts of the
emission control system) that is found defective in material or workmanship
under normal use for the applicable time period.

Parts or Labor

No charge to you.

WARRANTY DISCLAIMERS, LIMITATIONS & EX-

CLUSIONS

Disclaimer of Consequential Damage & Limitation of Implied
Warranties

CMSI Inc.  disclaims any responsibility for:

Loss of time

Loss of use of vehicle

Transportation expenses (rental and /or towing)

Any other incidental or consequential damage

Any other incidental or consequential expenses (storage)

Duration of Implied Warranties

Any Implied Warranties, including the implied warranty of merchantability
and fitness for a particular purpose are limited to the duration of this written
warranty.

State Laws May Vary

The previously listed limitations or exclusions may not apply to a motor
scooter because of state laws. Some states may not allow limitations on
how long an implied warranty lasts. Some states may not allow exclusion or
limitation of incidental or consequential damages.

Summary of Contents for Milano 49cc


































Reviews: