T'nB SPCAM4K, Instructions Manual

Page: 39 / 80

39
LCD Screen 2“
Lens f/2.2mm 4 elements hemipherical Glass lens, Wide-angle lens 170°
Wifi Built in Wifi
Languages English, French, Spanish, Portugese
Video Resolutions Resolution: 4K (3840*2160) 30fps/ 2,7K (2688*1520) 30 fps/
1080P(1920*1080) 60fps /1080P(1920*1080) 30fps/ 720P (1280*720P)
90fps/ 720P (1280*720P) 60fps/ 720P (1280*720P) 30fps
Video Format MOV
White balance Video and Photo
Video compression format H.264 codec
Photo resolution 16/ 12/ 8/ 5/ 2MP
Battery and charging 900 mAh rechargeable lithium-ion - Charge via USB
Audio Build-in microphone
Memory microSD Class 10 or higher required - Up to 32GB capacity supported
Photo modes single shot / burst
Frame frequency 50Hz / 60Hz
USB interface USB2.0
Power supply 3,7 V
Recording time up to 1hour and 30 minutes
Charging time About 1hour and 30 minutes
Operating System Windows XP/Vista/Win7/Win8/Win10/Mac
Included cables Micro USB/USB cable
Other Weight: 60g (with battery), HDMI output
Dimension of the camera 5.9 x 4.1 x 2.3 cm
EN
Notice to users:
The device delivers exceptional images and
videos. Therefore, only the micro SD cards
of minimum class 10 are accepted by the
device
Battery care and storage
The camera contains delicate parts,
especially the battery. It is not advisable to
drop, dismantle, open, crush, bend, deform,
pierce, expose to micro waves, burn or
repaint the camera, or to insert things in the
battery opening. Do not use the camera or
the battery if they are damaged, for example
if they are cracked, punctured or water
damaged. If you dismantle or puncture the
battery, it may explode or catch fire. Do not
store your camera and battery in excessive
heat or cold. Very high or very low tempera-
ture can reduce the battery life or prevent
proper functioning. Avoid sudden changes
in temperature or humidity as condensation
may occur inside or outside the camera.
Battery disposal: The lithium-ion batteries
contain recyclable materials and are conside-
red recyclable. Find out about the local laws
and the recycling centres in your locality.
Before throwing the lithium-ion batteries,
cover the terminal parts with sticky tape or
with a packaging foil to isolate and prevent
the terminals from coming into contact with
other metallic objects so that they do not
catch fire while transporting.
Prevention of damage due to the water in
your camera
The rubber seal that covers the inside of
the housing forms a waterproof barrier that
protects your sport camera in wet conditions
and under the water. Make sure that the
rubber seal remains clean. A single hair or
a grain of sand can cause a leak. After each
use in the salt water, you must rinse the
outside of the housing with some fresh water
and dry it. Otherwise, the pivot may rust and
the salt accumulates in the seal, which can
cause some failures. To clean the seal, rinse
it in the fresh water and shake it dry (wiping
with a cloth may leave fluff and compromise
the seal). Reinstall the seal into the slot of
the back door of the housing.
CAUTION: If you do not follow these precau-
tions whenever you use your sport camera,
the leaks can damage or destroy your came-
ra. The warranty does not cover the damage
caused by user error.
_Notice_SPCAM4K.indd 39 11/01/2017 16:30