Insert 3A fuse into fuse holder,
check lights on the charge
controller (after 5 seconds the
green LED should be on and the
2 red LEDs should be off)
To Sign Light
Plug in 3 way connector
(from Alpha Sign Light)
To Solar Panel
Plug in 2 way connector
(from Solar Panel)
3 of 4
Cable ties can be
used to lift
Secure mounting post using Jubilee
Clips (not supplied) and tighten
Check operation and fit access
cover, ensure adequate ventilation
Insert battery pack into column and
use hook to hang over back board,
TAKE CARE NOT TO DAMAGE
BATTERIES
10
11
12
15
14
13
Feed wire from luminaire through
hole in the column (use grommet)
Fit post cap onto column
Drill 10mm hole for Alpha Sign Light
in required position on column
7
8
9
