CONTROLLER OPERATION
1.
The
switch marked “
CONTINUOUS OPERATION
– AUTOMATIC
” makes it possible to switch between
two operation modes of the circulating pump: automatic and continuous.
1)
automatic operation mode
:
-
the green indicator marked “AUTOMATIC” is lit,
- the controller switches the pump on or off depending on the temperature determined by the
sensor,
- the rotary knob is used to set the temperature at which the pump is switched off,
- the circulating pump operates at temperatures lower than the value set in the temperature scale;
as soon as the temperature determined by the sensor increases, the pump switches off.
2)
continuous operation mode
:
- the green indicator goes out,
- the pump operates on a continuous basis (e.g. to check pump operation).
2.
If the red indicator light is on, the pump is working.
3.
The controller is equipped with an electronic thermometer featuring a digital display indicating the
temperature on the return pipe (in the 20-99
o
C range).
SAFETY DEVICES
The pump and the controller are protected by means of a 500 mA fuse which blows up in emergency
situations (e.g. short-circuit in the pump or in the controller).
DELIVERY SET
controller
clamps (2 pcs.)
6 mm wall plugs (2 pcs.)
WARRANTY
TMK sp.j. grants the user a warranty for the SP 100CW controller. The warranty period is 3 years from the
date of purchase of the device, however not longer than 4 years from the date of manufacture.
WARRANTY TERMS AND CONDITIONS
Warranty claims shall be accepted provided that the terms and conditions of warranty, and general rules of
operation of electronic devices, are complied with as required. TMK sp.j. guarantees appropriate
workmanship, high quality and reliable operation of the controller. In the event of any faults in the
controller’s operation, or defects which can be attributed to the manufacturer, TMK sp.j. shall repair or
replace the faulty controller with a defect-free device within 14 working days from the date of returning the
controller (in person or through post). The warranty scheme explicitly excludes all defects arising due to the
user’s fault and, particularly, defects caused by mechanical damage, faulty mounting, water ingress or
operation of the device contrary to the general rules of operation of electronic devices.
The warranty is only valid with a proof of purchase.
DATE OF SALE:
..........................
day, month, year
..........................
Seller’s stamp and signature
MANUFACTURER:
TMK sp.j.
62-
300 Września
Szosa Witkowska 105
tel./fax + 48 61 437 97 60
...........................
DATE OF MANUFACTURE
