WWW.TMGINDUSTRIAL.COM
8 / 33
Toll Free:1-877-761-2819
Introduction
We congratulate you on choosing this high quality hydraulic backhoe! The purpose of this instruction manual is to help you
maintain and use your backhoe. Read the instruction manual carefully. It contains information and guidance that will help
you achieve years of reliable service and performance. The backhoe has been designed to require only little maintenance
(cleaning and lubricating). Some of the instructions are general due to unknown and varying conditions. If you have any
doubt or problems, please contact your dealer or the importer. We wish you safe and pleasant work with this tool!
Attaching and using the backhoe will require some previous experience in tractor operation. These instructions on the
operation of the backhoe are important to read even if you are experienced operator. Make sure no one operates the
backhoe without receiving a proper training in the use of the equipment and they will read the instruction manual and safety
instructions before use. Keep these instructions safe the whole lifetime of the equipment. Lost instruction manual will be
replaced by your dealer. Remember to pass this instruction manual to any new owner of the equipment.
Application
The backhoe is designed and built for farms, drainage ditches, nurseries, golf courses, utilities, and cemeteries. An
unobstructed view of the work area, comfortable positioning of the controls and walk through platform allow for hours of
fatigue free work. The backhoe is attached to the tractor with 3-point hitch. The backhoe is suitable for contracting work;
the spill can be loaded on a trailer or platform. The backhoe cannot be used for lifting as it may tip over.
Attaching the backhoe is fast and easy. The backhoe is attached to the tractor using 3-point connection. The control
platform of the backhoe sits on top of the tractor draw hook and control levers are used from the backhoe control platform.
Backhoe turns slowly and steadily 180 degrees to each side. Two hydraulic stabilizers come as standard as well as 30 cm
wide bucket.
Terminology
“Right” or “Left” as used in this manual is determined by facing the direction the machine will operate while in use unless
otherwise stated.
Owner Assistance
The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to
provide you with quality customer service. If customer service or repair parts are required contact a dealer. A dealer has
trained personnel, repair parts and equipment needed to service the machine. The parts on your machine have been
specially designed and should only be replaced with genuine parts.
Serial Number Plate
For prompt service always use the serial number and model number when ordering parts from your dealer. Be sure to include
your serial and model numbers in correspondence also.
