D. Fill the gasoline tank outdoors with the engine off and allow the engine to cool completely. Don't
handle gasoline if you or anyone nearby is smoking, or if you're near anything that could cause it to
ignite or explode. Reinstall the fuel tank cap and fuel container cap securely.
E. If you spill gasoline, do not attempt to start the engine. Move the machine away from the area of
the spill and avoid creating any source of ignition until the gas vapors have dissipated. Wipe up any
spilled fuel to prevent a fire hazard and properly dispose of the waste.
F. Allow the engine to cool completely before storing in any enclosure. Never store a machine that
has gas in the tank, or a fuel container, near an open flame or spark such as a water heater, space
heater, clothes dryer or furnace.
G. Never make adjustments or repairs with the engine running. Shut down the engine, disconnect the
spark plug wire, keeping it away from the spark plug to prevent accidental starting, wait 5 minutes
before making adjustments or repairs.
H. Never tamper with the engine’s governor setting. The governor controls the maximum safe
operation speed and protects the engine. Over-speeding the engine is dangerous and will cause
damage to the engine and to the other moving parts of the machine. If required, see your
authorized dealer for engine governor adjustments.
I.
Keep combustible substances away from the engine when it is hot.
J. Never cover the machine while the muffler is still hot.
K. Do not operate the engine with the air cleaner or the carburetor air intake cover removed. Removal
of such parts could create a fire hazard. Do not use flammable solutions to clean the air filter.
L. The muffler and engine become very hot and can cause a severe burn; do not touch.
General Safety
WARNING
Operating this Stump Grinder safely is necessary to prevent or minimize the risk of death or serious
injury. Unsafe operation can create a number of hazards for you. Always take the following precautions
when operating:
A. Your machine is a powerful tool, not a plaything. Exercise extreme caution at all times. The
machine is designed to grind stumps. Do not use it for any other purpose.
B. Know how to stop the Stump Grinder quickly.
C. Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise caution to avoid
slipping or falling.
D. See manufacturer’s instructions for proper operation and installation of accessories.
E. Never use the machine without ensuring that all guards and shields are in place.
F. Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the
Stump Grinder. This includes all shields and guards. Modifications to your machine could cause
personal injuries and property damage and will invalid your warranty.
G. If the machine start to make an unusual noise or vibrate, shut down the engine, disconnect the
spark plug wire, keeping it away from the spark plug to prevent accidental starting, wait 5 minutes
for engine to cool down, then inspect for damage. Vibration is generally a warning of trouble.
Check damaged parts and clean, repair and/or replace as necessary.
H. Never tamper with safety devices. Check their proper operation regularly.
I.
Before performing any maintenance or inspection procedure, shut down the engine, disconnect
W W W . T M G I N D U S T R I A L . C O M
P 0 6 / 2 2
T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
