Chapter 4 Configuring the Motherboard
14
TI7NBF Socket 370 ATX Motherboard User’s Manual
4.3 Clear CMOS Select: JP10
Use JP10, a 3-pin header, to clear the contents of the CMOS RAM.
Do not clear the CMOS RAM unless it is absolutely necessary. You
will lose your password, etc.
JP10
Jumper Setting
Function
1 2 3
pin 1-2: short
Normal
1 2 3
pin 2-3: short
Clear CMOS
NOTE:
To clear CMOS, the ATX-power connector should be
disconnected from the motherboard.
4.4 CPU Select: JP13, JP15, JP20, JP22
Configure JP13, JP15, JP20 and JP22 jumpers according to the
type of processor installed on the motherboard. Please refer to the
table below.
CPU
JP13
JP15
JP20
JP22
Intel
Celeron
open
1-2 short
short
open
Intel
Coppermine
short
1-2 short
short
open
Cyrix III
(100MHz)
open
2-3 short
open
short
Cyrix III
(133MHz)
open
2-3 short
open
open
