Chapter 6 BIOS and System Setup
TI7NBA Socket 370 ATX Motherboard User’s Manual
51
PNP OS Installed
This field allows you to specify if the operating system installed in your
system is plug and play aware.
NOTE: Operating systems such as DOS, OS/2, and Windows 3.x do
not use PnP
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically. However, this capability needs you to use a PnP operating
system such as Windows 95. The default value is
Manual
.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is
Disabled
.
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
These fields allow you to determine the IRQ/DMA assigned to the ISA
bus and is not available to any PCI slot.
Used MEM base addr
Select a base address for the memory area used by any peripheral that
requires high memory. The default setting is
N/A
.
CPU to PCI Write Buffer
When enabled, this option increases the efficiency of the PCI bus to and
speed up the execution in the processor. By default, this field is set to
Enabled
.
PCI Dynamic Bursting
When enabled, this option combines several PCI cycles into one. By
default, this field is set to
Disabled
.
PCI Master 0 WS Write
When enabled, this option increases the write cycle speed.
PCI Delay Transaction
When enabled, this option delays PCI data transaction. By default, this
field is set to
Enabled
.
PCI#2 Access #1 Retry
This item enables PC#2 Access #1 attempts. By default, this field is set to
Disabled
.
