Chapter 6 BIOS and System Setup
TI6NB Pentium II 440BX ATX Motherboard User’s Manual
49
6.10 Integrated Peripherals
This option sets your hard disk configuration, mode and port.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALSP
AWARD SOFTWARE INC.
IDE HDD Block Mode
: Enabled
Onboard Parallel Port
: 378/IRQ7
IDE Primary Master PIO
: Auto
Parallel Port Mode
: SPP
IDE Primary Slave PIO
: Auto
IDE Secondary Master PIO
: Auto
IDE Secondary Slave PIO
: Auto
IDE Primary Master UDMA
: Auto
IDE Primary Slave UDMA
: Auto
IDE Secondary Master
UDMA
: Auto
IDE Secondary Slave UDMA
: Auto
On-Chip Primary PCI IDE
: Enabled
On-Chip Secondary PCI IDE
: Enabled
USB Keyboard Support
: Disabled
Init AGP Display
First
: Disabled
Onboard FDC Controller
: Enabled
Onboard Serial Port 1
: 3F8/IRQ4
ESC : Quit
Ç
È
Å
: Select Item
Onboard Serial Port 2
: 2F8/IRQ3
F1 : Help
PU/PD/+/- : Modify
UART Mode Select
: Normal
F5 : Old Values
(Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from
the disk drive, PIO (Programmed
Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput
to
33Mb/sec with the Ultra DMA/33 feature. The options are
Auto
and
Disabled
.
