TMC Auto Top-up IR, Instructions Manual

Page: 12 / 56

TROUBLE SHOOTING
Problem: Pump not activating with low water levels
1. Possible Cause: No power.
Solution: Check connections and ensure IR Sensors and pump are connected to the correct DC jacks.
Solution: Ensure IR Sensors are clean and working. Re-install in correct position, then turn off and on again.
Test components for correct activation. Check pump for damage or debris.
Problem: Pump constantly on
1. Possible cause: IR Sensor failure and or control unit error.
Solution: Ensure parts are clean and working. Re-install in correct position, then turn off and on again.
Test components for correct activation.
Problem: Pump activating with high water levels
1. Possible cause: Control unit error and/or IR sensor error.
Solution: Ensure parts are clean and working. Re-install in correct position, then turn off and on again.
Test components for correct activation.
12