background image

P25 - SRM9022 RADIO – OPERATING INSTRUCTIONS 

© 

TMC Radio 2007 

page 34  

TNM-U-E-0055 Issue 2.1a 

A “

Back

” or “

M

” key press returns to the Message Reply Pop-up screen. 

When “

OK

” key is pressed, the selected short message is sent in reply to the received 

message, and the radio returns to the default screen. 

 

4.2.15.7 

Text Message Reply Screen 

 

This menu is used to reply with a free form text message. 

 

 

The maximum length of text message is 210 characters.  The number of characters entered 
is displayed in the top right hand side. 

The characters are entered via the keypad by pressing the relevant key one or more times to 
choose each character. 

The 

 

key is used to move the curser to the left. 

The 

 key is used to move the curser to the right. 

A “

Reset

” button press and hold for less than one second deletes the character to the left of 

the cursor, and moves the curser position to the left by one.   

Holding the “

Reset

” button down for more than one second deletes all characters from the 

curser position to the right.  A new character entered is put on the current cursor location.   

The ‘

#

’ key is used to toggle upper and lower case. 

The “

0

” key is the space key. 

When “

Back

” key “

M

” is pressed, the radio returns to the Message Reply pop-up screen. 

Pressing “

OK

” sends the edited text message in reply to the sender of the message.  The 

radio returns to the default screen. 

 

Summary of Contents for SRM9022-P25



























































Reviews: