INSTRUCTIONS FOR INSTALLATION AND USE
Important Safety Information - Please Read Carefully
•
Caution:
Do not use any other power supply unit with the V
2
iLumenAir as the light unit may
not work and this may cause irreparable damage to the light unit. If the PSU supplied with the
unit needs to be replaced then please obtain an authentic V
2
iLumenAir PSU supplied by one of
Tropical Marine Centre’s local stockists.
• Always isolate the PSU from the mains electricity before installing or carrying out any maintenance.
•
Caution:
Do not operate this appliance if any part of it has a damaged cord or plug, is malfunctioning,
or has been dropped, immersed in water or damaged in any way. If the external cord of this unit is
damaged, it should be replaced by a cord exclusively available from the manufacturer or his service agent.
• This unit is designed to be used indoors and is not suitable for any outdoor applications.
•
Caution:
Ensure the light unit is securely installed above the tank before operating.
•
Caution:
Always leave a drip-loop in the DC supply cable to the V
2
iLumenAir light unit to prevent
water running down the cable and reaching the PSU (see picture below).
•
Caution:
Do not splash or submerge the lamp or power supply.
•
Caution:
Do not obstruct the cooling fans in any way.
• To prolong the life of your lamp unit please ensure that it is kept free of dust, salt and other
debris.
• Dispose of this unit responsibly. Check with your local authority for disposal information.
V
900/1200
2
1
V2iLumenAir 900-1200 instructions multilingual v2-2014 REWORKED FINAL_Layout 1 25/07/2014 12:28 Page 3
