EZ-LAN Unity 20 user manual version 3.3.3 120919
- 8 -
To change the VLAN group assignment, hold the Group Select button for few seconds to unlock the
group. The display will begin flashing. Then press the button to cycle trough all available groups. After
the desired group is selected, wait for a few seconds for this new group to be saved and for the switch
to internally reconfigure the port group. The display will stop flashing.
All of the ports within the same group are linked together and they can exchange data, while other
ports in other groups are not connected.
The same group can appear multiple times in network, even in the same unit – all ports can even be
set to the same group.
H
ARDWARE
I
NFORMATION
•
Each Ethernet port has status LEDs that indicate data activity (IN or OUT).
•
If the status LED is blinking, the Ethernet port is receiving signal.
•
If the status LED is not blinking, the Ethernet port is not receiving signal.
•
All ports have separate optical and galvanic isolation.
•
Ethernet connectors are Neutrik EtherCon RJ45.
•
Ethernet is 10/100/1000 Base-TX with auto-negotiation.
3. Optional Rear RackMount Kit
An optional Rear RackMount Kit is available for 8-point mounting within racks of various sizes, providing
greater physical integrity to the EZ-LAN enclosure. This is particularly beneficial if the rack is transported.
