TMB PPGBSPOE006M, User Manual

Page: 11 / 23

ProPlex GBS Mini PoE User Manual v1.0 - 03292021
- 11 -
Important: Be sure to reinsert the yoke screws into the unit
after yoke has been removed. Store yoke in a safe place
until needed again.
R
ACK
M
OUNT
K
ITS
ProPlex RackMount Kits are designed to allow easy rack mounting of ProPlex PortableMount units.
ProPlex PortableMount enclosures include a yoke for truss mounting. Before attaching RackMount Kit, remove the
yoke by unscrewing four Phillips-head (crosshead) screws which attach the yoke to the chassis.
I
NSTALLING THE
R
ACK
M
OUNT
E
ARS
ProPlex RackMount Kits are available for both Single-unit and Dual-unit mounting configurations. The 1U
RackMount Kit Single is comprised of two rack ears, one long and one short. The Dual has two short rack ears +
two dual joiners for front and rear of the units.
To fasten the rack ears or joiners to the ProPlex PortableMount chassis, remove the two chassis screws on each
side at the front or rear of the chassis. These same screws are used to securely fasten the RackMount ears and
joiners to the chassis.