Silverado/Sierra-2019
4.Connect white and brown signal wire
Electric
Installation by
Magnetic Control
Power board
g
with wired magnetic induction module .
Power board
switch
1. Pull out the fuse and
connect the battery wire.
Battery
2. Connect the control wire and arrange all function
wires to the pointed positions.
5. Insert back the fuse and
sort out the wires.
Battery
3. Connect motor wire and LED lamp
wire.
Chassis on the right
The signal wire and power board switch pass
into the vehicle through the hole.
Controller
Step 1: Find out the control input wire and pull out the fuse (ensuring
p
p
p
(
g
circuit safety during installation) and connect the positive and
negative pole of wire harness to vehicle battery respectively.
Note: Control wire can not be modified privately.
11
www.tmax.biz
